Dry Sole Clean Machine
The PG Series dry sole cleaning machine uses high‑speed nylon brushes to remove sand, dust, and debris different footwear soles – without water. Advanced sensor activates brushes when stepped on, and stops seconds after user leaves, saving standby energy. Its compact footprint fits warehouses, cleanrooms, production halls, and logistics hubs. No plumbing or wastewater – ideal for humidity‑sensitive environments like electronics, semiconductor, and battery production. The rugged brush assembly and stainless‑steel housing ensure durability, while the pull‑out dust tray simplifies disposal. Plug in and maintain spotless floors with minimal upkeep.
Waterless Design
This dry‑brush system operates without water, eliminating both the need for on‑site plumbing and the risk of water residue on floors. It is especially valuable in areas where drainage is unavailable or where strict humidity control is required – such as lithium‑battery drying rooms and semiconductor cleanrooms. The video below demonstrates the cleaning cycle and the machine’s seamless integration into daily facility workflows.
Precision Engineering
-
10 mm Deep‑Reach Brushes – The extra‑long nylon bristles penetrate deep into sole treads and textured surfaces, dislodging fine particles that standard short‑bristle cleaners miss.
-
Interactive Touchscreen – The built‑in display allows operators to adjust start/stop delays and extend cleaning cycles to match varying traffic volumes – all with a few taps.
-
Dual Debris Collection – A removable stainless‑steel dust tray catches fallen particles for easy periodic emptying. For even stricter environments, an optional 1,200 W vacuum unit can be added to actively draw fine dust into a sealed container, preventing any secondary re‑dispersion.
Complete Entry Contamination Control
PG Series dry shoe sole cleaning machine is designed as the first line of defence in a comprehensive entry‑control system. It works alongside turnstiles, air showers, hand‑washing stations, and rapid doors to form a sequential cleanliness barrier. Widely adopted in optics, semiconductor, IC assembly, new energy, pharmaceuticals, and food production, this integrated approach stops floor‑borne contaminants at the entrance – before they ever reach your production floor.
Dry Sole Clean Machine
| Model | MS-PG10 | MS-PG13 | MS-PG15 | MS-PG18 | MS-PG23 | MS-PG28 | MS-PG30 |
|---|---|---|---|---|---|---|---|
| Product Dimension | 1000*760*160 | 1300*760*160 | 1500*760*160 | 1800*760*160 | 2300*760*160 | 2800*760*160 | 3000*760*160 |
| Clean Area | 760*500 | 1060*500 | 1260*500 | 1520*500 | 2020*500 | 2520*500 | 2720*500 |
| Handrail | 830*800 | 1130*800 | 1330*800 | 1630*800 | 2130*800 | 2530*800 | 2830*800 |
| Start/Stop | Sensor Start / Delay Stop | ||||||
| AC Input | 120-240V | ||||||
| Motor Power | 200W | ||||||
| Safe&Protection | Overload & Leakage Protection | ||||||
| Cleaning Mode | Roller Washing | ||||||
| Noise | <60dB | ||||||
| Main Material | 304 Stainless Steel | ||||||
| Max. Load (kg) | 150kg | 200kg | 250kg | 300kg | 300kg | 400kg | 400kg |
| Service Life | 8 years | ||||||
Frequently Asked Questions
How does the dry sole cleaning machine work?
Dry sole cleaning machine uses motor-driven nylon brushes that rotate at high speed, scrubbing the sole to dislodge dirt and debris. All particles fall into a removable dust drawer for easy disposal. No water, chemicals, or plumbing required.
What types of footwear can be cleaned?
PG Series Dry Sole Cleaning Machine is designed for all types of industrial footwear soles, including cleanroom shoes, anti-static slippers, flat shoes, leather shoes, rubber shoes, and safety boots with deep treads. It effectively cleans the sole surface and grooves – the brushes reach deep into tread patterns to remove trapped particles.
What types of footwear can be cleaned?
PG Series Dry Sole Cleaning Machine is designed for all types of industrial footwear soles, including cleanroom shoes, anti-static slippers, flat shoes, leather shoes, rubber shoes, and safety boots with deep treads. It effectively cleans the sole surface and grooves – the brushes reach deep into tread patterns to remove trapped particles.
Is installation complicated? Does it require plumbing?
No. Installation is straightforward – simply place the unit on a flat floor at the desired entrance and plug it into a standard grounded power outlet (220V). No water source or piping is required, making it suitable for facilities without water supply, those with high humidity sensitivity, or where pipe installation is difficult.
What are the maintenance requirements for the dry sole cleaning machine?
Maintenance is minimal. The stainless-steel dust collection drawer requires periodic emptying – removal, disposal of collected debris, and reinsertion are straightforward procedures. The brushes generally have a service life of 5‑8 years. Regular inspection is recommended; brushes with significant wear should be replaced promptly to maintain effective cleaning performance. The sensor and motor do not require routine servicing under normal operating conditions.
What industries is the dry sole cleaning machine suitable for?
The dry sole cleaning machine is widely used in electronics assembly, semiconductor fabrication, integrated circuit manufacturing, new energy battery production, pharmaceutical manufacturing, food processing, optics, and logistics centers. It is particularly valuable in humidity-sensitive environments such as lithium-battery dry rooms, where water-based cleaning is not an option.
Can the dry sole cleaning machine be integrated with other entry control systems?
Yes. The machine can be seamlessly integrated with turnstiles, air showers, hand-washing stations, and rapid doors to form a complete contamination-control gateway at the entrance of clean production areas.
Is the dry sole cleaning machine safe to use?
Yes. The unit is built with overload and leakage protection for electrical safety. The counter-rotating brush design neutralizes lateral forces, making it easy to keep your foot stable during cleaning. An optional handrail can be added for additional support if needed.
Can the dry sole cleaning machine be customized for specific requirements?
Yes. The machine supports non-standard customization. For example, an optional 1,200 W high-power vacuum attachment for ultra-clean environments that actively draws fine dust into a sealed container to prevent secondary dispersion.
EN 
ES 
FR 
DE 
TR 
IT 
PL 
RU 
PT 
ZH 
JA 
AR