Boot Washing Machine
Dual-Action Protection
Designed for High BootsThe ED-S20 Fully Automatic Disinfection Boot Washer is constructed with durable 304 stainless steel for superior wear and corrosion resistance. Its integrated disinfectant system ensures thorough sterilization, combining cleaning, disinfection, and access control in one automated process.Before & After Cleaning
| Test Item (Unit) | Before | After |
| Total Bacterial Count (CFU/cm² ) | 2.0*10⁴ | <1 |
| Total Fungal Count (CFU/cm²) | 6.7*10³ | <1 |

Boot Washing Machine Parameter
| Item | Details / Value | Item | Details / Value |
|---|---|---|---|
| Dimension | 1500*760*960mm | Operating Current | 3A |
| Sewage Pump | 120W | Spray Pump | 20W |
| Bottom Brush Motor | 200W, 220V | Side Brush Motor | 45W, 24V DC |
| Cleaning Area | 760*480mm | Main Body Material | SUS304 Stainless Steel |
| Absorbent Pad | PVA / PU Sponge | Operational Noise | <60dB |
| Activation Sensor | Photoelectric / Mechanical | Safety Protections | Short circuit / Overload / Leakage |
| Pump Voltage | 24V DC | Water Tank Capacity | 30L |
| Drying Area | 430*550mm | Maximum Load Capacity | 260kg |
| Drainage Method | Automatic / Manual | Service Life | 8 years |
| Operating Voltage | 110/220V AC | Weight | ~150kg |
| Disinfectant | Low-concentration common disinfectants | ||
Frequently Asked Questions
What is the ED-S20 boot washing machine for?
It automatically cleans and disinfects work boots at facility entry points to prevent contamination.
Which industries is boot washer designed for?
Entrances to clean rooms, labs, ESD protected area, livestock farming, food & dairy processing, pharmaceuticals, and any controlled environment.
How does the cleaning process work?
Boots are scrubbed by rotating brushes, rinsed with water, disinfected with mist, and dried—all in one pass.
Does the boots cleaning machine require special installation?
No, installation is very simple. Just connect the water inlet hose and the drain hose, then plug in the power.
How long does the cycle take?
About 8–12 seconds per person, depending on soil level.
How often do the brushes/pads need replacing?
Replacement frequency depends on usage. Generally, brushes last 2-3 years and pads need replacing yearly.
How should the boot wash machine be maintained?
Regularly refill disinfectant, clean the tank, and occasionally check brushes and pumps.
How much does a boot washing machine cost?
Email us for a quick quote right now: esd@macrosafegates.com








